User
Operation
Problem
Beep sound
What to check
How to fix the problem
Feeding Motor end its life (Brush is worn out).
Foreign substance entered into the Feeding Motor and lock up the
motor.
Replace Feeding Motor with a new one.
Foreign substance prevents rotation of the Feeding Gear.
Remove the foreign substance.
Yes
No
Hook L is broken.
Replace Hook L with a new one.
Yes
Hook L or Center Hook is worn out.
Replace Hook L or Center Hook with a new one.
No
The sensor at Feeding Gear does not work.
Connect the connectors firmly.
Yes
1) Harness 7P unit is cut.
Sensor board C unit is broken.
2) Since the capacity of the battery is not enough, the Feeding gear
can not rotate by regulated times.
1) Replace Harness 7P unit or Sensor board C unit.
2) Charge the battery or replace the battery with a new one.
No
1) V shape groove of the Feeding Gear is worn out.
2) The spring at Feeding Gear is worn out.
1) Replace the Feeding Gear.
2) Replace the spring.
Yes
The play between the Magazine and Magazine Cover is too big.
Turn the Adjust Ring to tighter position and reduce the play.
Bip, bip, bip, bip…
(Fast single beep)
< Overcurrent error beep >
The load to cut the tiw wire is too high.
1) Cutter is worn out.
2) Hook parts are too dirty.
1) Replace the Cutter with a new one.
2) Clean up the Hooks with Paslode Degreaser Cleaner and then apply
Molykote grease.
No
Cutter Lever is worn out.
Cutter Shaft is broken.
Replace Cutter Lever or Cutter Shaft.
Yes
Battery is discharged or ends its life.
Charge the battery or replace it with a brand new one.
No
Hook L is broken.
Replace Hook L with a new one.
Yes
Hook L or Center Hook is worn out.
Replace Hook L or Center Hook with a new one.
No
The PC boards can not detect the rotation of the Twisting Motor.
Connect the connector and wire harnesses firmly.
Yes
1) Twisting Motor is locked. Or Twister is locked.
2) Connector on the Twisting Motor is cut.
1) Remove foreigh substances which lock the motor or Twister.
2) Replace Twisting Motor with a new one.
No
Hook L is broken.
Replace Hook L with a new one.
Yes
Hook L or Center Hook is worn out.
Replace Hook L or Center Hook with a new one.
No
Hook R is broken.
Replace Hook R with a new one.
Yes
Hook R or Center Hook is worn out.
Replace Hook R or Center Hook with a new one.
No
The PC boards can not detect the rotation of the Twisting Motor.
Connect the connector and wire harnesses firmly.
Yes
1) Twisting Motor is locked. Or Twister is locked.
2) Connector on the Twisting Motor is cut.
1) Remove foreigh substances which lock the motor or Twister.
2) Replace Twisting Motor with a new one.
No
Tie wire used is not correct.
Use TW1525
Yes
1) The Connector of Harness 7P unit is not connected to the Sensor
Board F unit (Reel sensor) firmly.
2) The photo sensor of Sensor Board F unit (Reel sensor) is dirty and
can not sense the projections of the wire reel.
3) Harness 7P unit is cut or Sensor board F unit is broken.
1) Connect the connectors firmly.
2) Clean up the photo sensor inside of the reel magazine with cotton swab.
3) Replace the Harness 7P unit or Sensor Board F unit with a new one.
No
Cooling Fan can not work.
Connect the connectors firmly.
Yes
Wire harnesses at Cooling Fan are cut.
Cooling Fan is broken.
Replace the Cooling Fan with a new one.
No
The PC boards can not detect the rotation of the Twisting Motor.
Connect the connector and wire harnesses firmly.
Yes
1) Twisting Motor is locked. Or Twister is locked.
2) Connector on the Twisting Motor is cut.
1) Remove foreigh substances which lock the motor or Twister.
2) Replace Twisting Motor with a new one.
< TROUBLE SHOOTING OF RB655 (3/3) >
-
80
-
Releasing the wire
Bip-beee, Bip-beee, ...
<Twisting Motor error beep>
(New beep sound from
RB655)
Does the connector on Twisting Motor
is connected to Sub board firmly?
Do the three wire harnesses (Yellow,
Bule, White) connected same color wire
of the Main Board firmly?
7-
The Hooks release the tie wire
and then stops with beep
sound.
After three ties are made,
Bip-bip-bip-bip, bip-bip-bip-
bip,...
(4 repetitive beep)
<Reel sensor error beep>
Is the wire used TW1525 series tie
wire?
After one tie is made,
Bip-bip-bip-bip-bip-bip, bip-bip-
bip-bip-bip-bip,...
(6 repetitive beep)
<Cooling fan error beep>
Is the connector of Cooling Fan
connected to the Sub board firmly?
The Hooks do not release the
tie wire.
No beep
Does the Hook R releases the tie wire?
Bip-beee, Bip-beee, ...
<Twisting Motor error beep>
(New beep sound from
RB655)
Does the connector on Twisting Motor
is connected to Sub board firmly?
Do the three wire harnesses (Yellow,
Bule, White) connected same color wire
of the Main Board firmly?
Does the tool repeat the initializing
action?
5-
Wire can not be cut.
Cutting tie wire
6
-
Twisting wire
No beep
Does the Hook L grabs the tie wire
firmly?
Twister twists wire but the
length of the one side of
straight part of the tie is short.
Or the Twister does not twist
onece in several ties.
Does the Hook L grabs the tie wire
firmly?
Tool pulls wire but then stops
and emits beep sound.
Not twisting wire
No beep
Does the Hook L grabs the tie wire
firmly?
Bip-beee, Bip-beee, ...
<Twisting Motor error beep>
(New beep sound from
RB655)
Does the connector on Twisting Motor
is connected to Sub board firmly?
Do the three wire harnesses (Yellow,
Bule, White) connected same color wire
of the Main Board firmly?
No beep
Not Pulling wire
Bip, bip, bip, bip…
(Fast single beep)
< Overcurrent error beep >
Is the Feeding gear rotating?
4-
The Feeding Motor
spins backwards
and pull the tie wire
Normal tool
operation
Cause of the problem
Not pull enough wire
(Tool makes big tail tie - loose
tie)
No beep
Is the tie wire deformed inside of the
Magazine?
Bip-bip-bip, bip-bip-bip,...
(Triple repetitive beep)
< Feeding action error >
Is the connector on Sensor Board C
connected firmly?
No
During the pulling action the tip
of the tie wire is off from the
Hooks and the wire goes back
to Magazine.
No beep
