- 36 -
Magazine Assy. (Continued)
1. Set a Special Rubber Washer 7 in the position shown in the figure.
2. Align the hinge of the Magazine with that of the Magazine Cover.
3. Put a Torsion Coil Spring in between the hinges and place its legs on the Magazine and the
Magazine Cover.
4. Put a Parallel Pin 1289 through the Magazine, Magazine Cover, and Torsion Coil Spring, and push it
in until the Special Rubber Washer is fit into a groove.
Note) Confirm that the Magazine Cover is opened by a spring force
ASSEMBLY PROCEDURE
EE39602
(SPECIAL RUBBER WASHER 7)
Place the legs of the
Torsion Coil Spring.
The special rubber
washer is fit into the
groove.
FF31289
(PARALLEL PIN 1289)
KK33327
(TORSION COIL
SPRING 3327)
