![background image](http://html1.mh-extra.com/html/airmatic/rb655/rb655_service-manual_2878472010.webp)
[RB655 Tying times indication mode]
With the beep sound and LED blinks, total tying times can be read without opening tool frame.
Readable tying times: Minimum 1,000 ties Maximum 999,000 ties
How to go to the "Tying times indication mode"
1) Turn the Main Switch off and remove battery.
4) With using a screw driver, keep the Twist Guide Cover open
2) Remove Tie wire from Magazine.
as the picture below shows.
3) Set the Torque adjust dial to the position "1".
5) Set the battery to the tool.
6) Keep pulling the trigger and turn the Main Switch on.
How to read the tying times
Tool shows each digit indication first (LED blinks only) followed by number indication (LED and beep).
Example) # of ties is 16,300 ties.
LED blinks : 3 times
LED
Beep
LED blinks : 2 times
LED
Beep
LED blinks : one time
LED
Beep
LED blinks : 2 times
(Rapid)
Sum #1, #2 and #3 = 16,000 ties. (300 ties can not be read with this program. It can be read by Checker box)
After the rapid 2-time blink (#4), tool repeats indication from #1.
#4
End
5
6
#3
Digit of 1,000
#1
Number indication is
6 times which means
6,000 ties
Note
Number indication is
one time which
means 10,000 ties
No indication
because # of ties
does not reach
100,000.
#2 Digit of 10,000
Then, the tool start showing how many ties has been made with LED blinks and beep sound.
3
4
8
9
Digit indication: LED blinks only (No beep)
7
Number indication: LED blinks and beep sound
Digit of 100,000
1
2
- 8 -