![background image](http://html1.mh-extra.com/html/airmatic/rb655/rb655_service-manual_2878472029.webp)
- 27 -
Feed Assy. (Continued)
TORQUE ADHESIVE
50-80 cN.m
Loctite Purple
1. Fit the Magnet Holder unit into the D-cut section of the Feeding Gear Shaft.
2. Using a Pan Head Screw 3 x 4 with Loctite Purple applied to it, assemble a Sensor Board to a
Feeding Gear Base Unit. (Tightening torque: 50-80 cN.m)
3. Put a Feeding Gear Shaft A into the bearing of the Feeding Gear Base Unit.
ASSEMBLY PROCEDURE
Feeding Gear Base Unit
RB70079
(SENSOR BOARD C UNIT)
Apply Loctite Purple.
AA21102
(PAN HEAD SCREW 3 x 4)
RB70217
(MAGNET HOLDER UNIT)