- 28 -
Feed Assy. (Continued)
1. Put a Feed Gear A and a Special Plain Washer 5 onto a Feeding Gear Shaft A in that order, and
secure with an E-Retaining Ring 2.5.
2. Put a Feeding Gear B Unit and a Special Plain Washer 4.2 x 13 x 1 onto the Feeding Gear Shaft B
of the Feeding Gear Base unit, and secure with an E-Retaining Ring 3.
3. Secure a Wire Guide C onto a Wire Guide Base Unit with Hex. bolts 3 x 5.
(Tightening torque: 100-150 cN.m)
Note) Assemble the Feeding Gear B Unit so that the cross rib side will face upward.
ASSEMBLY PROCEDURE
TORQUE ADHESIVE
100-150 cN.m
Not required
JJ10113
(E-RETAINING RING 2.5)
EE39121
(SPECIAL PLAIN WASHER 5)
RB10770
(FEED GEAR A)
Feed Gear Shaft A
Feed Gear Shaft B
JJ10112
(E-RETAINING RING 3)
EE39168
(SPECIAL PLAIN WASHER
4.2 x 13 x 1)
RB70054
(FEEDING GEAR B UNIT)
RB10774
(WIRE GUIDE C)
Assemble the Feeding gear B unit so
that the cross rib side will face upward.
BB40481
(HEX BOLT 3 x 5)
