- 43 -
Arm B Assy. (Continued)
1. Apply Molykote PG-662 Grease to the perimeter of a Fixed Cutter.
2. Put the Fixed Cutter through a hole in a Cutter and align it with a hole in an Arm B to assemble.
3. Apply Molykote PG-662 Grease to a Step Pin 1730.
4. Align a hole in the Cutter with the one in a Cutter Connecting Rod to insert the Step Pin 1730.
5. Put an Arm C over the fixed Cutter, put a Temporary Fixing Bolt through it, and then, tighten with a
Bolt 3 x 16. (Tightening torque: 180-220 cN.m)
6. Remove the Temporary Fixing Bolt.
ASSEMBLY PROCEDURE
TORQUE ADHESIVE
180-220 cN.m
Not required
1. Make sure that the Cutter Lever is free of epoxy glue.
2. Move the Cutter Lever in the arrow direction to make sure that the Cutter Lever and Cutter are
smoothly interlocked with each other.
3. Make sure that the E-Retaining Ring has been firmly fit into the groove in the Cutter Lever Pin.
CHECK PROCEDURE
RB10749
(CUTTER)
FF41730
(STEP PIN 1730)
RB10748
(FIXED CUTTER)
BB40810
(BOLT 3 x 16)
RB10747
(ARM C)
Temporary fixing bolt
GREASE
MOLYKOTE PG-662
GREASE
MOLYKOTE PG-662
RB11666
(ARM COVER)
