manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 291 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 291

18-49

Measure Commands

VTIMe?

or cycle, however, measuring multiple cycles may be accomplished with the DISPLay option. 
The DISPlay parameter is also useful when measuring noise. The AC parameter is used to 
measure the RMS voltage subtracting out the DC component. The DC parameter is used to 
measure RMS voltage including the DC component. The AC RMS, DC RMS, and VAVG param-
eters are related as in the following formula:

DCVRMS

2

 = ACVRMS

2 

+ VAVG

2

<source> is {CHANnel<N> | FUNCtion<N> | WMEMory<N>} and <N> is 1, 2, 3, or 4.

Mode

Oscilloscope mode only.

Query

:MEASure:VRMS? {CYCLe | DISplay}, {AC | DC} [,<source>]

The query returns the RMS voltage of the specified source.

Returned Format

[:MEASure:VRMS] <value>[,<result_state>]<NL>

<value> is the RMS voltage of the selected waveform. If SENDvalid is ON, the <result_state> 
is returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the 

result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;":MEASURE:VRMS? CYCLE,AC"

VTIMe?

Query

:MEASure:VTIMe? <time> [,<source>]

Returns the measured voltage. <time> is the time interval between the trigger event and the 
specified edge (oscilloscope mode) or the time interval between the reference plane and the 
specified edge in TDR mode. <source> is {CHANnel<N> | FUNCtion<N> | RESPonse<N> | 
WMEMory<N>} and <N> is an integer, from 1 to 4.

Mode

Oscilloscope and TDR modes.

Returned Format

[:MEASure:VTIMe] <value>[,<result_state>]<NL>

<value> is the voltage at the specified time. In oscilloscope mode, <time> is the time mea-
sured from the trigger event. In TDR mode, <time> is measured with respect to the reference 
plane. If SENDvalid is ON, the <result_state> is returned with the measurement result. Refer 
to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:VTIME? 500E–3” 

VTOP

Command

:MEASure:VTOP [<source>]

Measures the statistical top of the selected source waveform. The source is specified with the 
MEASure:SOURce command or with the optional parameter following the VTOP command. 
<source> is {CHANnel<N> | FUNCtion<N> | RESPonse<N> | WMEMory<N>}. <N>, for chan-
nels, is dependent on the type of plug-in and its location in the instrument. For functions: 1 or 
2. For waveform memories (WMEMORY): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.

Mode

Oscilloscope and TDR modes.

Query

:MEASure:VTOP? [<source>]

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments