Agilent Technologies 86100A Programmer'S Manual Download Page 250

Page: 250 / 366

18-8

Measure Commands

AMPLitude:PI?

Returns the one level measurement. Always uses the vertical units of the channel. Use

“AMPLitude:ZLEVel?” on page 18-11

to return the zero level measurement.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:OLEVEL?”

Returned Format

[:MEASure:AMPLitude:OLEVel] <value><NL>

AMPLitude:PI?

Query

MEASure:AMPLitude:PI? {ONE | ZERO}

Returns the dual-dirac periodic interference measurement for the specified logic level.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:PI? ONE ”

Returned Format

[:MEASure:AMPLitude:PI] <value><NL>

AMPLitude:PIRMs?

Query

MEASure:AMPLitude:PIRMs? {ONE | ZERO}

Returns the RMS periodic interference measurement for the specified logic level. Uses the
current noise and interference units.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:PIRMS? ONE ”

Returned Format

[:MEASure:AMPLitude:PIRMs] <value><NL>

AMPLitude:Q?

Query

MEASure:AMPLitude:Q?

Returns the Q measurement.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:Q?”

Returned Format

[:MEASure:AMPLitude:Q] <value><NL>

AMPLitude:RINoise?

Query

MEASure:AMPLitude:RINoise? [{OMAMplitude | OLEVel}]

Returns the RIN (Relative Intensity Noise) measurement value which is only available for
optical signals. It can be based on the one level (

OLEVel

) or based on the RIN OMA measure-

ment (

OMAMplitude

). If no argument is given, the measurement value returned is for the cur-

rently selected type of RIN measurement as specified by the

“AMPLitude:RINoise:DEF” on

page 18-9

Summary of Contents for 86100A















































































































































































































































































































































































Search results

Summary of Contents for 86100A

Reviews:

Agilent Technologies 86100A, Programmer'S Manual, Page: 250 / 366

Search results

Summary of Contents for 86100A

Reviews: