manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 266 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 266

18-24

Measure Commands

HISTogram:HITS?

The query returns the measured frequency.

Returned Format

[:MEASure:FREQuency] <value>[,<result_state>]<NL>

<value> is the frequency value, in Hertz, of the first complete cycle on the screen using the 
mid-threshold levels of the waveform. If SENDvalid is ON, the <result_state> is returned with 
the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:MEASURE:FREQUENCY” 

HISTogram:HITS?

Query

:MEASure:HISTogram:HITS? [

{HISTogram}

]

Returns the number of hits within the histogram. The source can be specified with the 
optional parameter following the HITS query. The HISTogram:HITS? query only applies to the 
histogram.

Returned Format

[:MEASure:HISTogram:HITS] <value>[,<result_state>]<NL>

<value> is the number of hits in the histogram. If SENDvalid is ON, the <result_state> is 
returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the 

result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF” 
20 OUTPUT 707;”:MEASURE:HISTOGRAM:HITS?”

HISTogram:M1S?

Query

:MEASure:HISTogram:M1S? [

{HISTogram}

]

Returns the percentage of points that are within one standard deviation of the mean of the 
histogram. The source can be specified with the optional parameter following the M1S query. 
The HISTogram:M1S? query only applies to the histogram waveform.

Returned Format

[:MEASure:HISTogram:M1S] <value>[,<result_state>]<NL>

<value> is the percentage of points within one standard deviation of the mean of the histo-
gram. If SENDvalid is ON, the <result_state> is returned with the measurement result. Refer 
to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:HISTOGRAM:M1S?”

HISTogram:M2S?

Query

:MEASure:HISTogram:M2S? [

{HISTogram}

]

Returns the percentage of points that are within two standard deviations of the mean of the 
histogram. The sources can be specified with the optional parameter following the M2S 
query. The HISTogram:M2S? query only applies to the histogram waveform.

Returned Format

[:MEASure:HISTogram:M2S] <value>[,<result_state>]<NL>

<value> is the percent of points within two standard deviations of the mean of the histogram. 
If SENDvalid is ON, the <result_state> is returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:HISTOGRAM:M2S?”

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments