manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 267 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 267

18-25

Measure Commands

HISTogram:M3S?

HISTogram:M3S?

Query

:MEASure:HISTogram:M3S? [

{HISTogram}

]

Returns the percentage of points that are within three standard deviations of the mean of the 
histogram. The source can be specified with the optional parameter following the M3S query. 
The HISTogram:M3S? query only applies to the histogram waveform.

Returned Format

[:MEASure:HISTogram:M3S] <value>[,<result_state>] <NL>

<value> is the percentage of points within three standard deviations of the mean of the histo-
gram. If SENDvalid is ON, the <result_state> is returned with the measurement result. Refer 
to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:HISTOGRAM:M3S?”

HISTogram:MEAN?

Query

:MEASure:HISTogram:MEAN? [

{HISTogram}

]

Returns the mean of the histogram. The mean of the histogram is the average value of all the 
points in the histogram. The source can be specified with the optional parameter following 
the MEAN query. The HISTogram:MEAN? query only applies to the histogram waveform.

Returned Format

[:MEASure:HISTogram:MEAN] <value>[,<result_state>]<NL>

<value> is the mean of the histogram. If SENDvalid is ON, the <result_state> is returned with 
the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:HISTOGRAM:MEAN?”

HISTogram:MEDian?

Query

:MEASure:HISTogram:MEDian? [

{HISTogram}

]

Returns the median of the histogram. The median of the histogram is the time or voltage of 
the point at which 50% of the histogram is to the left or right (above or below for vertical his-
tograms). The source can be specified with the optional parameter following the MEDian 
query. The HISTogram:MEDian? query only applies to the histogram waveform.

Returned Format

[:MEASure:HISTogram:MEDian] <value>[,<result_state>]<NL>

<value> is the median of the histogram. If SENDvalid is ON, the <result_state> is returned 
with the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:HISTOGRAM:MEDIAN?”

HISTogram:PEAK?

Query

:MEASure:HISTogram:PEAK? [

{HISTogram}

]

Returns the number of hits in the histogram's greatest peak. The source can be specified with 
the optional parameter following the PEAK query. The HISTogram:PEAK? query only applies 
to the histogram waveform.

Returned Format

[:MEASure:HISTogram:PEAK] <value>[,<result_state>]<NL>

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments