manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 270 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 270

18-28

Measure Commands

JITTer:DDJVsbit:BITS?

Restrictions

Jitter mode. Software revision A.04.00 and above (86100C instruments). 

Returned Format

[:MEASure:JITTer:DDJVsbit] <value><NL>

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASure:JITTer:DDJVsbit?”

JITTer:DDJVsbit:BITS?

Query

MEASure:JITTer:DDJVsbit:BITS?

Returns definite-length block data. The data block contains the list of bits for which 

JIT-

Ter:DDJVsbit

? has returned values. Each bit value is a 32-bit integer (4 bytes). The data block 

is followed by a linefeed termination character (0A hex).

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode.

Example

10 OUTPUT 707;”:MEASURE:JITTER:DDJVSBIT:BITS?”

Returned Format

[:MEASure:JITTer:DDJVsbit:BITS] <block data><NL>

JITTer:DDJVsbit:EARLiest?

Query

:MEASure:JITTer:DDJVsbit:EARLiest?

Returns comma-separated values (string) for the earliest measured edge in the DDJ vs. bit 
graph. The string includes the bit number followed by the DDJ value. The DDJ value has units 
of time or unit interval as specified by the :MEASure:JITTer:UNITs command. 

Restrictions

Jitter mode. Software revision A.04.20 and above (86100C instruments). Option 200, 
Enhanced Jitter Analysis Software.

Returned Format

[:MEASure:JITTer:DDJVsbit:EARLiest] <string><NL>

The following is an example of a returned string: “

30, 3.4339e-12

”

Example

10 OUTPUT 707;”:MEASURE:JITTER:DDJVSBIT:EARLIEST?”

JITTer:DDJVsbit:LATest?

Query

:MEASure:JITTer:DDJVsbit:LATest?

Returns comma-separated values (string) for the latest measured edge in the DDJ vs. bit 
graph. The string includes the bit number followed by the DDJ value. The DDJ value has units 
of time or unit interval as specified by the :MEASure:JITTer:UNITs command. 

Restrictions

Jitter mode. Software revision A.04.20 and above (86100C instruments). Option 200, 
Enhanced Jitter Analysis Software.

Returned Format

[:MEASure:JITTer:DDJVsbit:LATest] <string><NL>

The following is an example of a returned string: “

30, 3.4339e-12

”

Example

10 OUTPUT 707;”:MEASURE:JITTER:DDJVSBIT:LATEST?”

JITTer:DJ?

Query

:MEASure:JITTer:DJ?

This query returns the deterministic jitter value measured on the current source.

Restrictions

Jitter mode. Software revision A.04.00 and above (86100C instruments).

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments