manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 176 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 176

10-6

Disk Commands

PWAVeform:RANGe:STARt

PWAVeform:RANGe:STARt

Restrictions

Software revision 4.10 and above on an 86100C. Option 201, Advanced Waveform Analysis 
Software installed. 

Command

:DISK:PWAVeform:RANGe:STARt <bit_number>

Sets or queries the start bit setting for saving a range of pattern waveform bits using the 
DISK:

PWAVeform

:SAVE command. <bit_number> is an integer. You must first specify that a 

range of the pattern will be saved by using the DISK:

PWAVeform

:RANGe command.

Query

:DISK:PWAVeform:RANGe:STARt?

Returned Format

[:DISK:PWAVeform:RANGe:STARt] <bit_number><NL>

Example

10 OUTPUT 707;":DISK:PWAVEFORM:RANGE:START 10"

PWAVeform:RANGe:STOP

Restrictions

Software revision 4.10 and above on an 86100C. Option 201, Advanced Waveform Analysis 
Software installed. 

Command

:DISK:PWAVeform:RANGe:STOP <bit_number>

Sets or queries the stop bit setting for saving a range of pattern waveform bits using the 
DISK:

PWAVeform

:SAVE command. <bit_number> is an integer. You must first specify that a 

range of the pattern will be saved by using the DISK:

PWAVeform

:RANGe command.

Query

:DISK:PWAVeform:RANGe:STOP?

Returned Format

[:DISK:PWAVeform:RANGe:STOP] <bit_number><NL>

Example

10 OUTPUT 707;":DISK:PWAVEFORM:RANGE:STOP 20"

PWAVeform:SAVE

Command

:DISK:PWAVeform:SAVE <file_name>

Saves a pattern waveform to a file with the file extension .csv. <file_name> is the name of the 
file, with a maximum of 254 characters (including the path name, if used). The file name 
assumes the present working directory if a path does not precede the file name. The data is 
saved in an ASCII comma separated file (csv), with the amplitude data for each source (chan-
nel or function) placed in a separate column. In addition to amplitude values, saved pattern 
waveform files include a header of setup information.

Patterns that include a large number of bits and high resolution involve large amounts of 
data. Saving these files may require several hours and one or two gigabytes (GB) of memory. 
Use *OPC or *OPC? with this command in order to synchronize data acquisition with remote 
control.

If you plan on loading a saved pattern waveform back into the instrument, be sure to also save 
the instrument setup. You will need to load (restore) the instrument settings at the same 
time that you load the associated pattern waveform.

Restrictions

Software revision 4.10 and above on an 86100C. Option 201, Advanced Waveform Analysis 
Software installed. Eye/Mask or Oscilloscope instrument mode with pattern lock triggering. 
One or more channels or functions (invert, subtract, or magnify) turned on. Optional MAT-
LAB Filter and Linear Feedforward Equalizer applications closed (not running).

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments