94
Agilent 1290 Infinity LC System Manual and Quick Reference
5
Quick Start Guide
Preparing the system
3
In the
Available Signals
box, highlight the required signal(s), and click
Add
to
move them to the
Selected Signals
box.
4
To configure the individual settings for each signal, highlight the signal in
the
Selected Signal
box and set the required values in the lower half of the
page.
The
Online Plot
window behaves like electronic chart paper, continuously
recording the output from the detector(s) and other output parameters. The
signals are drawn at the right of the window and move away to the left. Up to
90 min of past data is accessible. This is useful for checking the baseline and
looking at previous injections. The X and Y-axis scales can be adjusted directly
with the up/down buttons on each axis.
The
Adjust
button in the
Online Plot
window moves the current point on the
selected signal to the zero line. The selected signal is indicated by the color of
the Y-axis labels. A particular signal may be selected by clicking on the signal
or by clicking on the relevant signal description at the top of the plot.
The
Balance
button zeroes all detectors when pressed.
N O T E
In addition to the detector signals, parameter traces such as temperature and pressure can
also be plotted. With
Apply to Method
, the settings in this page can be stored into the
method.
N O T E
Changes made in the
Online Plot
page do not in any way affect the data stored into the
individual data files.
