Chapter 6
Planning Your Application Program
(cr)
is the terminating character, carriage return (0Dh)
Example
command:
$01S1C2314(cr)
response:
!01(cr)
The command tells channel 2 of
the analog output module in slot 1 of the ADAM-
5000/TCP system at address 01h to increase its
output value by 20 (14h) counts which is
approximately 30 µA. The analog output module
confirms the increase.
Note:
In order to perform a Trim Calibration, either a mA meter or a
resistor and voltmeter should be connected to the
module’s
output prior to calibration.
6-138
ADAM-5000/TCP
User’s Manual
Summary of Contents for ADAM-5000/TCP Series
