![background image](http://html1.mh-extra.com/html/advantech/adam-5000-tcp-series/adam-5000-tcp-series_manual_2857301109.webp)
Chapter 6
Planning Your Application Program
mal Modbus
network address of an ADAM-5000/ TCP system.
(cr)
is the terminating character, carriage return (0Dh).
Example
command:
%01000A40(cr)
response:
!01(cr)
The ADAM-5000/TCP system with address 01h is
configured to a baud rate of 115.2 Kbps and with
checksum generation or validation.
The response indicates that the command was re-
ceived. Wait 7 seconds to let the new configuration
setting take effect before issuing a new command to
the system.
Note:
All configuration parameters can be changed dynami-
cally, except checksum and baud rate parameters.
They can only be altered when the INIT* terminal is
grounded.
Baud
Rate
Code
Baud
Rate
03h
1200 bps
04h
2400 bps
05h
4800 bps
06h
9600 bps
07h
19.2 Kbps
08h
38.4
Kbps
09h
57.6
Kbps
0Ah
115.2
Kbps
Table 6-3 Baud rate codes
6-42
ADAM-5000/TCP
User’s Manual
Summary of Contents for ADAM-5000/TCP Series
