User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
243
5.
(Optional) If desired, type names for
camera positions, in spaces provided.
NOTE: The number of cameras which appears in
this dialog depends on how Mira CHANNELS
were earlier configured in
Mira Config
/
Mira
Engineering Setup
menu; please refer to the
procedure “
information on configuring Mira CHANNELS for
the proper number of ISO cameras being
recorded.
6.
(Optional) If desired, select unique camera
numbering for cameras in use.
You should designate unique camera numbers,
with no duplicate numbers. These camera
numbers are referenced in the “Clip Register”
listing in the main Instant Replay user interface.
7.
Click “
Create Event
” button.
“Create Event” dialog appear, as shown below.
8.
Click “
Start Recording
” button.
9.
Click “
Finish
” button to complete.
The “Create New Event” window closes.
The new event appears in the Clip Library, as
shown in the next step below.
ChA
in transport control area of Mira Explorer
will indicate “
RECORDING
” status, as shown in
next step below.
All cameras included in the ISO group will be
recording at the same time, even though the
“RECORDING” indicator does not appear in the
transports of the other ISO video channels.
5
6
9
8
7
Summary of Contents for Mira
Page 382: ......