User Operations Guide—Mira Instant Replay Server
302
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
CLIP PLAY MODE: Bank #0
Clip register Bank #0 has been set aside for the purpose of saving files from the
Mira Clip Library
into individual clip registers so that they
can be further trimmed and edited. In this way, Bank #0 is used to make sub-clips of content that is normally only available in the Mira Clip
Library. Bank #0 is only intended for Mira Clip Library clips (sometimes called “server clips”), and therefore Bank #0 differs visually from
clip banks 1-99.
For information on how to navigate between Clip Register Banks, see section
Change Clip Register Bank on page 288 and/or section
Load Clip Numerically on page 290. For more on Mira Clip Library, see section
CLIP PLAY Mode: Mira Clip Library on page 300.
To Add a Server Clip from Mira Clip Library to Bank #0
1.
Tap
(SK 7)
to enter Mira Clip
Library.
(A)
Mira Clip Library opens on selected PGM
channel.
2.
Tap
, or use QWERTY arrow
keys, or spin rotary dial to navigate
between clips in Mira Clip Library.
Tap
or
to expand or
collapse folders of clips.
3.
Tap
button to save highlighted
server clip to
Bank #0.
Mira Clip Library window does not close, so
that the user can save multiple clips to
Bank 0.
4.
Repeat steps
2 and 3
to add all desired
server clips to
Bank #0
.
5.
Tap
button to exit Mira Clip Library
Tap
(SK 10)
(B)
Mira Clip Library is replaced by
Bank #0
.
(Shown in next step)
1
2
A
A
3
OR
5
5
Continued on next page…
Summary of Contents for Mira
Page 382: ......