User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
31
Power-ON / Power OFF Procedure
Ensure the AC power cords are connected to the two AC inputs to the power supply on rear panel of the Mira server—it’s also a good idea
to plug them into two separate AC circuits, on two separate circuit-breakers. Then follow this procedure to power on/off the Mira server.
Also ensure the USB QWERTY Keyboard, USB Mouse and a computer monitor are connected to the appropriate connectors on the rear
panel of the Mira server chassis.
Power ON Procedure
—
Normal
Use this procedure with the gray plastic front panel in place on the front of the Mira server chassis.
1.
Press & release
(Power) button.
The “
Abekas
” logo will illuminate, indicating the
server is powering ON.
2.
If required, continue with optional
Windows Login
procedure, located on
page 33 below.
Power ON Procedure
—
Alternative
Use this procedure if the gray plastic front panel is missing from the front of the Mira server chassis.
1.
Locate center post at front of Mira chassis,
with small black rocker switch & USB port.
2.
Press
and
release
RIGHT side of this
spring-loaded black rocker switch.
You will see the row of 12 blue lights located at the top edge of the chassis illuminate briefly (for a second or so) followe
d by a short “beep” sound from
inside the chassis. This all indicates the server is powering ON.
3.
Continue with
Windows Login
procedure, located on page 33 below.
Power OFF Procedure
—
Normal
It is highly recommended to always use this “software” power-down procedure for the Mira server, to ensure an orderly shut-down of all
components inside the server.
1.
Move mouse pointer to lower edge of
screen, to reveal Windows taskbar.
2.
Click
(Windows START) icon.
(A)
“
Windows Start
”
menu appears, as shown
below.
3.
Click
button.
“
Shutting down…
” screen appears.
In a few seconds, Mira Server will power OFF.
1
1
2
1
2
3
A
Summary of Contents for Mira
Page 382: ......