Abekas Mira, User'S Operation Manual

Page: 187 / 382

User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014 Copyright ©2014, Abekas Incorporated 185
Mira 8-Channel Server for Stand-Alone Stereoscopic 3D Channels
Use this procedure to configure Mira with stand-alone Stereoscopic 3D (3D) paired channels that will not be used for instant replay
applications. The RS422 serial control port is required only on the “LEFT” channel.
Each 3D channel pair can be used as either a recorder or player ( a given 3D channel cannot record and play at the same time ).
NOTE: If you want to use Mira for Sports Instant Replay with 3D cameras, refer to “ Cameras” on page 195 below.
Mira 8-Channel Server
To open the Mira Engineering Setup window shown below, perform the procedure “ Launching Mira Engineering Setup Utility ” found on page 173 above.
1. Click “ Channels ” tab.
2. Click radio button for “ VV VV ” channel-pairing on (ChA-ChD) group of video channels..
3. Click radio button for “ VV VV ” channel-pairing on (ChE-ChH) group of video channels.
4. Click to accept changes.
Group for Channels A through D

VV VV
( ChA =3D LEFT #1) + ( ChC =3D RIGHT #1) . RS422= ChA .
( ChB =3D LEFT #2) + ( ChD =3D RIGHT #2) . RS422= ChB .
Group for Channels E through H

VV VV
( ChE =3D LEFT #3) + ( ChG =3D RIGHT #3) . RS422= ChE .
( ChF =3D LEFT #4) + ( ChH =3D RIGHT #4) . RS422= ChF .
1
4
2
3