User Operations Guide—Mira Instant Replay Server
254
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Parameter Name
Style
Parameter Settings
Operational Description
8.
T-BAR “VAR-2” MAX Speed
Numeric
1X = Minimum Value
2X = Default Value
99X = Maximum Value
(
Increment is 1X real-time
)
When the
function on the T-BAR is
active, this parameter Assigns maximum speed
of VAR PLAY when the
T-BAR
is positioned at the
very
TOP
of travel.
9.
T-BAR “VAR-2” MIN Speed
Numeric
0X = Minimum Value
-2X = Default Value
-99X = Maximum Value
(
Increment is 1X real-time
)
When the
function on the T-BAR is
active, this parameter Assigns maximum speed
of VAR PLAY when the
T-BAR
is positioned at the
very
BOTTOM
of travel.
If the MIN Speed is set to any negative speed
below 0X, then a 5° “dead zone” appears at the
mid-point of T-BAR travel.
10.
T-BAR “VAR-3” MAX Speed
Numeric
1X = Minimum Value
4X = Default Value
99X = Maximum Value
(
Increment is 1X real-time
)
When the
function (
VAR-3
) on T-BAR
is active, this parameter Assigns maximum speed
of VAR PLAY when the
T-BAR
is positioned at the
very
TOP
of travel.
11.
T-BAR “VAR-3” MIN Speed
Numeric
0X = Minimum Value
-4X = Default Value
-99X = Maximum Value
(
Increment is 1X real-time
)
When the
function (
VAR-3
) on T-BAR
is active, this parameter Assigns maximum speed
of VAR PLAY when the
T-BAR
is positioned at the
very
BOTTOM
of travel.
If the MIN Speed is set to any negative speed
below 0X, then a 5° “dead zone” appears at the
mid-point of T-BAR travel.
12.
AUTO-MARK IN
Numeric
00:00:01 = Minimum Value
00:03:00 = Default Value
59:55:00 = Maximum Value
(
Increment is 1 frame
)
Assigns timecode value that’s subtracted from
the
POI
(Point of Interest) when saving a clip
that has no
IN
point set.
AUTO MARK IN is also used when GOTO IN
operations are performed while no
IN
point is
set in the clip workspace.
13.
AUTO-MARK OUT
Numeric
00:00:01 = Minimum Value
00:05:00 = Default Value
59:55:00 = Maximum Value
(
Increment is 1 frame
)
Assigns timecode value that’s added to the
POI
(Point of Interest) when saving a clip that has no
OUT
point set.
AUTO MARK OUT is also used when GOTO OUT
operations are performed while no
OUT
point is
set in the clip workspace.
Summary of Contents for Mira
Page 382: ......