User Operations Guide—Mira Instant Replay Server
330
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Change “@START” and “@END” Flags in Play List Mode
In
mode, there are two columns (with corresponding softkeys) labeled
“@START”
and
“@END.”
These flags dictate the play behavior of individual clips in a playlist. The
“@START”
flag changes the play behavior of a clip at its in-point,
while the
“@END”
flag changes the play behavior of a clip when it reaches its out-point. The possible settings for these flags are:
@ START Flag Settings
Action during Playlist AIR Playout
@START = PLAY (default) Automatically plays playlist clip item.
@START = PAUSE
Pauses on first frame of playlist clip item. User must then tap
button to
continue playlist playback.
@ END Flag Settings
Action during Playlist AIR Playout
@END
= TAKE (default) Automatically advances playlist to next clip item.
@END
= PAUSE
Pauses on last frame of clip item; list does not automatically advance to next item
in playlist. User must tap
button to continue playlist playout.
@END
= LOOP
Continuously loops playback of clip item; list does not automatically advance to next
item in playlist. User must tap
button to continue playlist playout; as an
alternative, the user may tap
button to toggle the LOOP function OFF, and
the currently playing playlist item will advance the next time the OUT point in that
playlist item is reached.
@END
= PLAY
Will ignore OUT point of clip item, and plays clip forever; list does not
automatically advance to next item in playlist. User must tap
button to
continue playlist playout.
Summary of Contents for Mira
Page 382: ......
