User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
227
Countdown Timer From Quad Viewer Output
Whenever playback channels are assigned to a Mira Instant Replay Control Panel (see
Assign Replay Channel(s) to Mira Control
Panel), the video output of the Mira Quad Viewer is automatically replaced by the
Mira Countdown Timer
.
A single countdown timer HD-SDI output can display information for either one or two playback channels (pictured in Figure 13 below).
Figure 13
Mira Countdown Timer
A.
Channel Label
(assigned in
B.
Calibrated Audio Metering
(for up to 4 audio tracks when operating in ISO channel configuration)
C.
Clip Time Remaining
(present in any mode of operation when an IN-point and an OUT-point are both set in a playback channel.
Counts down the time until the clip OUT-point is reached)
D.
Clip Time Remaining Bar
(shrinks to illustrate the last five seconds remaining in a clip)
E.
Playlist Time Remaining
(only present in
mode. Show time remaining for entire playlist currently on-air)
F.
Playlist Item
(shows current playlist item, as well as total number of items in playlist currently on-air)
G.
Playlist PVW
(denotes that this channel is currently being used as PVW channel in a 2-channel, PGM/PVW playlist)
A
B
C
D
E
F
G
Summary of Contents for Mira
Page 382: ......
