User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
201
Instant Replay with Super Slow Motion Cameras for Mira 8-Channel Server
Use this procedure to configure Mira for Super Slow Motion (SSM) grouped channels that will be used for instant replay applications. The
RS422 serial control port is required only on the “LINK-A” channel.
IMPORTANT NOTE:
If you wish to use Mira for stand-alone SSM operation, then please use the procedure “
” on page 186 above.
Mira 8-Channel Server
To open the Mira
Engineering Setup
window shown below,
perform the procedure “
Launching Mira Engineering Setup Utility
1.
Click “
Channels
” tab.
2.
Click radio button for desired channel-group.
3.
Click
to accept changes.
Group for Channels A through D
2X Super Slow Motion Camera
(
ChA
=CAM #1 LINK-A)+(
ChB
=CAM #1 LINK-B)
.
RS422=
ChC
.
to (DMAT-AB RS422 port #1)
DMAT-AB control panel operates in “1R/1P” mode in MENU.
3X Super Slow Motion Camera
(
ChA
=CAM #1 LINK-A)+(
ChB
=CAM #1 LINK-B)+(
ChC
=CAM #1 LINK-C)
.
RS422=
ChD
.
to (DMAT-AB RS422 port #1)
DMAT-AB control panel operates in “1R/1P” mode in MENU.
Group for Channels A through H
ISO2 from two 3X Super Slow Motion Cameras
(
ChA
=CAM #1 LINK-A)+(
ChB
=CAM #1 LINK-B)+(
ChC
=CAM #1 LINK-C)
.
(
ChD
=CAM #2 LINK-A)+(
ChE
=CAM #2 LINK-B)+(
ChF
=CAM #2 LINK-C)
.
RS422=
ChG
.
to (DMAT-AB RS422 port #1)
RS422=
ChH
.
to (DMAT-AB RS422 port #2)
DMAT-AB control panel operates in “2R/2P” mode in MENU.
Group for Channels A through H
ISO3 from three 2X Super Slow Motion Cameras
(
ChA
=CAM #1 LINK-A)+(
ChB
=CAM #1 LINK-B)
.
(
ChC
=CAM #2 LINK-A)+(
ChD
=CAM #2 LINK-B)
.
(
ChE
=CAM #3 LINK-A)+(
ChF
=CAM #3 LINK-B)
.
RS422=
ChG
.
to (DMAT-AB RS422 port #1)
DMAT-AB control panel operates in “3R/1P” mode in MENU.
1
3
2
Summary of Contents for Mira
Page 382: ......