Accumula-
ted energy
calculator
POSCLOSE
IACCRST
BLOCK
BLK_ALM
Alarm limit
check
IACCLOAL
IACCALM
I3P
I_A
I_B
I_C
GUID-DAC3746F-DFBF-4186-A99D-1D972578D32A-ANSI V1 EN
Figure 133:
Functional module diagram for calculating accumulative energy and
alarm
Accumulated energy calculator
This module calculates the accumulated energy I
y
t [(kA)
y
s]. The factor y is set with the
CurrExp
setting.
The calculation is initiated with the
POSCLOSE
input open events. It ends when the
RMS current becomes lower than the
AccDisLevel
setting value.
GUID-75502A39-4835-4F43-A7ED-A80DC7C1DFA2 V1 EN
Figure 134:
Significance of theDiffTimeCorr setting
The
DiffTimeCorr
setting is used instead of the auxiliary contact to accumulate the
energy from the time the main contact opens. If the setting is positive, the calculation
of energy starts after the auxiliary contact has opened and when the delay is equal to
the value set with the
DiffTimeCorr
setting. When the setting is negative, the
calculation starts in advance by the correction time before the auxiliary contact opens.
The accumulated energy outputs
IACC_A (_B, _C)
are available through the
Monitored data view on the LHMI or through tools via communications. The values
Section 12
1MRK 505 277-UUS C
Monitoring
328
Technical Manual
Summary of Contents for REB650
