ABB OmniCore V400XT, Product Manual

Page: 99 / 466

The digital inputs comply with the requirements of current sinking inputs type 1
for rated voltage 24 VDC according to IEC 61131-2:2017 clause 6.4.4.2.
Note
If external power supplies are used, they must have over-current protection. A
recommendation is to have separate fuses (0.5A) for each channel (Ch1, Ch2)
to increase diagnostic coverage on inputs.
Note
If separate power supplies are used for each channel (Ch1, Ch2) they must have
common ground.
For more connections other than those illustrated above, carefully assess the risk
before use and contact your local ABB for support.
Connector X15
Description
Connector for Safety IO signals Connection
S2L 3.50 90F Type
Weidmüller
1728690000 Article number
2 4 6
1 3 5
8 10 12
7 9 11
14 16
13 15
18
17
xx1800000555
Name Pin Name Pin
24V_MON 2 MON_PB1 1
24V_MON 4 MON_LAMP1 3
- 6 - 5
24V_CH2_EXT 8 0V_IO_EXT 7
AS_CH2_P 10 AS_CH2_N 9
ESOUT2_P 12 ESOUT2_N 11
ESOUT1_P 14 ESOUT1_N 13
AS_CH1_P 16 AS_CH1_N 15
24V_CH1_EXT 18 0V_IO_EXT 17
The connector X15 allows for connecting automatic stop devices.
Automatic Stop is only operational in automatic mode. See Protective stop and
emergency stop on page 21 .
More information is also available in Application manual - Functional safety and
SafeMove .
Continues on next page
Product manual - OmniCore V400XT 99
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.9 Descriptions for connectors
Continued