ABB OmniCore V400XT, Product Manual

Page: 159 / 466

4 Maintenance
4.1 Maintenance schedule for the OmniCore controller
General
The controller must be maintained at regular intervals to ensure its function. The
activities and intervals are described in this section.
Activities and intervals
Detailed in section: Interval Maintenance
activity Equipment
Inspecting the OmniCore V400XT
controller on page 160 12 months
i
Inspection Complete controller
Cleaning air filter on page 161 Cleaning Air filter
Replacement of air filter on page 167 24 months Replacement Air filter
Inspecting the OmniCore V400XT
controller on page 160 6 months
i
Inspection System fans
Cleaning of the controller cabinet
on page 164 Cleaning Control cabinet
Cleaning the FlexPendant on
page 165 When needed Cleaning FlexPendant
Function test of emergency stop on
page 171 12 months Function test Emergency stop
(FlexPendant)
Function test of manual, auto, and
manual full speed mode with Flex-
Pendant on page 172 12 months Function test Manual, auto and
manual full speed
mode with FlexPend-
ant
Function test of three-position en-
abling device on page 173 12 months Function test Enabling device
Function test of Automatic Stop on
page 175 12 months Function test Auto stop (tested if
used)
Function test of General Stop on
page 176 12 months Function test General stop (tested
if used)
Function test of external emergency
stop on page 177 12 months Function test External emergency
stop (tested if used)
Function test of ESTOP_STATUS
output on page 178 12 months Function test ESTOP_STATUS
output (tested if
used)
Function test of reduced speed
control on page 179
.
During commis-
sioning Function test Reduced speed
control
i
The interval depends on the working environment of the equipment: a cleaner environment may
extend the maintenance interval and vice versa.
Function test after replacement of component
After replacing a component in the controller, the function tests should be
performed. See
Function tests on page 171 .
Product manual - OmniCore V400XT 159
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
4 Maintenance
4.1 Maintenance schedule for the OmniCore controller