ABB IRB 920, Product Manual

Page: 676 / 1008

Note Action
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See
Cut the paint or surface on the robot before
replacing parts on page 118 .
2
xx2100001091
Removing the screws of the transmission module
assembly. 3
Take out the transmission module assembly with
the axis-4-2 timing belt. 4
Removing the pulley on the ball screw lower position
Note Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
The
unit is sensitive to ESD on page 49 .
2
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See
Cut the paint or surface on the robot before
replacing parts on page 118 .
3
Continues on next page
676 Product manual - IRB 920
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.6.11 Replacing the outer arm
Continued