ZyXEL Communications UAG4100 Скачать руководство пользователя страница 78

Страница: 78 / 477

Chapter 7 Monitor

UAG4100 User’s Guide

Each field is described in the following table.

Table 21

Monitor > System Status > Interface Status

LABEL

DESCRIPTION

Interface Status

If an Ethernet interface does not have any physical ports associated with it, its entry is
displayed in light gray text.

Expand/Close

Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.

Name

This field displays the name of each interface. If there is an

Expand

icon (plus-sign) next

to the name, click this to look at the status of virtual interfaces on top of this interface.

Port

This field displays the physical port number.

Status

This field displays the current status of each interface. The possible values depend on what
type of interface it is.

For Ethernet interfaces:

•

Inactive

- The Ethernet interface is disabled.

•

Down

- The Ethernet interface does not have any physical ports associated with it or

the Ethernet interface is enabled but not connected.

•

- The LAN Ethernet interface is enabled and connected.

•

Speed / Duplex

- The WAN Ethernet interface is enabled and connected. This field

displays the port speed and duplex setting (

Full

Half

For virtual interfaces, this field always displays

Down

. If the virtual interface is

disabled, it displays

Inactive

For VLAN and bridge interfaces, this field always displays

Down

. If the VLAN or

bridge interface is disabled, it displays

Inactive

For PPP interfaces:

•

Inactive

- The PPP interface is disabled.

•

Connected

- The PPP interface is connected.

•

Disconnected

- The PPP interface is not connected.

Zone

This field displays the zone to which the interface is assigned.

IP Addr/Netmask This field displays the current IP address and subnet mask assigned to the interface. If the

IP address and subnet mask are 0.0.0.0, the interface is disabled or did not receive an IP
address and subnet mask via DHCP.

IP Assignment

This field displays how the interface gets its IP address.

Static

- This interface has a static IP address.

DHCP Client

- This interface gets its IP address from a DHCP server.

Services

This field lists which services the interface provides to the network. Examples include

DHCP relay

, and

DHCP server

. This field displays

n/a

if the interface does not provide

any services to the network.

Action

Use this field to get or to update the IP address for the interface. Click

Renew

to send a

new DHCP request to a DHCP server. Click

Connect

to try to connect a PPPoE/PPTP

interface. If the interface cannot use one of these ways to get or to update its IP address,
this field displays

n/a

Interface
Statistics

This table provides packet statistics for each interface.

Refresh

Click this button to update the information in the screen.

Expand/Close

Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.

Name

This field displays the name of each interface. If there is a

Expand

icon (plus-sign) next to

the name, click this to look at the statistics for virtual interfaces on top of this interface.

Содержание UAG4100






























































































































































































































































































































































































































































































Результаты поиска

Содержание UAG4100

Отзывы:

Похожие инструкции для UAG4100

Бренды по названию

Популярные бренды

ZyXEL Communications UAG4100, Руководство пользователя

Результаты поиска

Содержание UAG4100

Отзывы:

Похожие инструкции для UAG4100

Бренды по названию

Популярные бренды