ZyXEL Communications UAG4100 Скачать руководство пользователя страница 91

Страница: 91 / 477

Chapter 7 Monitor

UAG4100 User’s Guide

The following table describes the icons in this screen.

Model

This displays the AP’s model number.

Mgnt. VLAN
ID(AC/AP)

This displays the Access Controller (the UAG) management VLAN ID setting for the AP and
the runtime management VLAN ID setting on the AP.

VLAN Conflict

displays if the AP’s management VLAN ID does not match the UAG’s

management VLAN ID setting for the AP. This field displays

n/a

if the UAG cannot get

VLAN information from the AP.

Description

This displays the AP’s associated description. The default description is “AP-” + the AP’s
MAC Address.

Station

This displays the number of stations (aka wireless clients) associated with the AP.

Recent On-line
Time

This displays the most recent time the AP came on-line.

N/A

displays if the AP has not

come on-line since the UAG last started up.

Last Off-line
Time

This displays the most recent time the AP went off-line.

N/A

displays if the AP has either

not come on-line or gone off-line since the UAG last started up.

Table 33

Monitor > Wireless > AP Information > AP List Icons

LABEL

DESCRIPTION

This AP is not on the management list.

This AP is on the management list and online.

This AP is in the process of having its firmware updated.

This AP is on the management list but offline.

This indicates one of the following cases:

•

This AP has a runtime management VLAN ID setting that conflicts with the VLAN ID setting on

the Access Controller (the UAG).

•

A setting the UAG assigns to this AP does not match the AP’s capability.

Table 32

Monitor > Wireless > AP Information > AP List (continued)

LABEL

DESCRIPTION

Содержание UAG4100






























































































































































































































































































































































































































































































Результаты поиска

Содержание UAG4100

Отзывы:

Похожие инструкции для UAG4100

Бренды по названию

Популярные бренды

ZyXEL Communications UAG4100, Руководство пользователя

Результаты поиска

Содержание UAG4100

Отзывы:

Похожие инструкции для UAG4100

Бренды по названию

Популярные бренды