Zte ZXR10 8900 Series, Руководство по установке оборудования

Страница: 80 / 109

ZXR10 8900 Series Hardware Installation Manual
F
IGURE
67 P
LUGGING
P
OWER
M
ODULE
S
TEP
2 (ZXR10 8908)
1. Plug-in box 2. Power module
3. Hold the two sides or bottom of the power module guard with
hands and pull the guard upward to remove it. Screw down the
captive screw on the bottom side of the module to secure the
connection between the module and the plug-in box, as shown
in
Figure 68 .
F
IGURE
68 P
LUGGING
P
OWER
M
ODULE
S
TEP
3 (ZXR10 8908)
1. Plug-in box
2. Power module
3. Captive screw
4. Power module guard
4. Plug the power guard from the top of the plastic panel frame of
the module and push down the guard so that the round plastic
tappets on both sides of the guard are pinned by the clamp
slots of the plastic guard.
Result: Power module of 8908 has been plugged.
Unplug Power
Supply Module
To unplug power module of ZXR10 8902, perform the following
steps.
72 Confidential and Proprietary Information of ZTE CORPORATION