Zte ZXR10 8900 Series, Руководство по установке оборудования

Страница: 59 / 109

Chapter 4 19” Standard Cabinet Installation
Cabinet Accessories
Remove and Installation
Remove and Installation of Front and
Back Doors
The front and back doors have been installed before the device
leaves the factory. The front and back doors will be removed and
reinstalled if they affect construction.
Removing Front and Back Doors
To remove the front and back door, perform the following steps.
1. Open the front and back door. Remove the earthing cable (yel-
low green).
2. Fasten the lock screws which are near the hinge and pin. Re-
move the pin in the direction of upward. Hold the door to pre-
vent the door from dropping.
3. Pull the door upward, and then remove the door.
Result: The front and back doors have been removed.
Installing Front and Back Doors
To install the front and back door, perform the following steps.
1. Place the door to hinge on cabinet and keep the door and the
pin hole on the same line.
2. Insert the pin and fasten the lock screw.
3. Connect the earthing cable.
Door installation is shown in Figure 46 .
Confidential and Proprietary Information of ZTE CORPORATION 51