Zte ZXR10 8900 Series, Руководство по установке оборудования

Страница: 57 / 109

Chapter 4 19” Standard Cabinet Installation
Connecting the Cabinets
To connect many cabinets, perform the following steps.
1. Position the cabinets in the same row. Adjust high adjustable
nut in cabinet foot from first cabinet in left, adjust the height
between cabinet and floor, one row of cabinets must be on
same line. The verticality of cabinets must be less than 3mm.
2. Tighten locking nut from left to right and make it pasted to
cabinet. Make sure that the feet and cabinet are connected
firmly.
3. Remove the angle support on cabinet top. The angle support
is used to connect the near cabinets. Rotate the angle support
90 degrees. Connect the angle supports back to back. The
installation order is shown in
Figure 42 , Figure 43 and Figure
44 .
F
IGURE
42 R
EMOVE
S
CREW OF
A
NGLE
S
UPPORT
1. Fasten screws 2. Angle support
F
IGURE
43 R
EMOVE THE
A
NGLE
S
UPPORT
Confidential and Proprietary Information of ZTE CORPORATION 49