Zte ZXR10 8900 Series, Руководство по установке оборудования

Страница: 79 / 109

Chapter 5 Master Device Installation
Note:
The AC and DC power modules for the ZXR10 8912/8908/8905
plug-in boxes have the similar appearance and size. Before power-
on, check the power feed box at the rear of the plug-in box to see
if it is AC or DC. Check if the voltage meets the requirement to
prevent the power modules and the equipment from being dam-
aged.
Plug Power Supply
Module
To plug power module of ZXR10 8912/8908/8905, perform the
following steps.
1. Align the power module with the module slot on the plug-in
box, as shown in Figure 66 .
F
IGURE
66 P
LUGGING
P
OWER
M
ODULE
S
TEP
1 (ZXR10 8908)
1. Plug-in box 2. Power module
2. Plug the power module to the end so that it touches the back-
plate connector, when the module is still in place. Push the
plastic panel of the module forcibly until the module is com-
pletely plugged into the plug-in box. Secure the socket con-
nector connection between the module and the back-plate, as
shown in
Figure 67 .
Confidential and Proprietary Information of ZTE CORPORATION 71