ZF CruiseCommand 785CE, Инструкция по установке и устранению неисправностей

Страница: 48 / 160

SET-UP PROCEDURES
Page 40
To change the value:
A) Depress either the Up or Down Arrow to activate the Function
Menu.
B) Use the Up or Down arrow to scroll to the C4 Function Code.
C) Activate Set-up Mode. Refer to Section 6.2.
D) Change the Value of the Function.
E) When the value required is displayed, store the value. Refer to Sec-
tion 6.2.
6.3.17L0 - Troll Lever Range
The various Troll types:
• 00 = No Trolling Valve (Refer to Section 2.10.2 for operation)
(Default)
• 01 = Type 1 - 20 Degrees Trolling Command (Refer to Section 2.10.3
for operation)
• 02 = Type 2 - 35 Degrees Trolling Command (Refer to Section 2.10.3
for operation)
• 03 = Type 3 - 45 Degrees Trolling Command (Refer to Section 2.10.3
for operation)
Refer to Section 2.10 for the Types of Troll Mode operation and then
select the Troll Mode type required for this application.
To change the value:
A) Depress either the Up or Down Arrow to activate the Function
Menu.
B) Use the Up or Down arrow to scroll to the L0 Function Code.
C) Activate Set-up Mode. Refer to Section 6.2.
D) Change the Value of the Function.
Figure 44: C4 - Reversal Pause Ratio Set-up Activated
Figure 45: L0 - Troll Lever Range Set-up Activated
Function Code is blinking