ZF CruiseCommand 785CE, Инструкция по установке и устранению неисправностей

Страница: 119 / 160

TROUBLESHOOTING TRAIN-156 Rev.B 11/01
Page 23
Err
#
Title Description
27 Remote Station # 7 Faulted
Low Station # 7 Control Head’s lever position is out of range. The input appears to be too low.
28 Remote Station # 8 Faulted
Low Station # 8 Control Head’s lever position is out of range. The input appears to be too low.
29 Remote Station # 1 Button
Stuck Closed Station # 1 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
30 Remote Station # 2 Button
Stuck Closed Station # 2 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
31 Remote Station # 3 Button
Stuck Closed Station # 3 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
32 Remote Station # 4 Button
Stuck Closed Station # 4 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
33 Remote Station # 5 Button
Stuck Closed Station # 5 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
34 Remote Station # 6 Button
Stuck Closed Station # 6 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
35 Remote Station # 7 Button
Stuck Closed Station # 7 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
36 Remote Station # 8 Button
Stuck Closed Station # 8 Control Head’s Transfer Button has either been closed too long or has been closed since
power-up.
37 CAN Communication Stuff-
ing Error The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a stuffing type error.
38 CAN Communication Form
Error The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a form type error.
39 CAN Communication
Acknowledge Error The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a acknowledge type error.
40 CAN Communication Bit 1
Error The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a Bit 1 type error.
41 CAN Communication Bit 0
Error The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a Bit 0 type error.
42 CAN Communication CRC
Error The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a CRC type error.
43 CAN Communication Bus
Failed The Control-Area-Network protocol has detected an error in communication with other devices in
the network. The error type is a Bus Failure type error. This error cannot be recovered from without
recycling power to the Processor.
44 Communication Error Time-
out System 1 Communication with the system has been too long without a Refresh message.
45 Communication Error Time-
out System 2 Communication with the system has been too long without a Refresh message.
46
Communication Error Time-
out System 3 Communication with the system has been too long without a Refresh message.
47 Communication Error Time-
out System 4 Communication with the system has been too long without a Refresh message.
48 Communication Error Time-
out System 5 Communication with the system has been too long without a Refresh message.
49
Communication Error Time-
out System 6 Communication with the system has been too long without a Refresh message.
Table 1: Error Messages