ZF CruiseCommand 785CE Скачать руководство пользователя страница 17

Страница: 17 / 160

OPERATION

Page 9

2.10T

ROLLING

ALVE

ONTROL

PTIONAL

)

The CruiseCommand System is able to control electric Trolling Valves

that utilize single or dual solenoids.

The Troll Mode option is selected during Set-up.

2.10.1Trolling Valve Command Operating Modes

This system has two Modes of Operation when a Troll Valve Type of

command has been set up:

Troll

and

Non-Troll

. When the control sys-

tem is initially powered up, the default Mode Of Operation is the Non-
Troll Mode.

2.10.2Operation in Non-Troll Mode

During Non-Troll Mode the Trolling Valve will remain locked up or at

maximum oil pressure position and System will work in Normal Operat-
ing Mode.

2.10.3Operation in Troll Mode

Troll Mode is a feature that must be turned On and Off at the Control

Head.

A) Place the Control Head lever in the Neutral, Ahead, or Astern

Detent.

B) Depress and hold the transfer button for two seconds.

• The solid red indicator light on the Control Head will begin blink-

ing rapidly, indicating the system is now in Troll Mode.

C) Once the system has been placed in Troll Mode and in the Ahead or

Astern detent, the propeller will begin to rotate at approximately
30% of Idle lock-up RPM.

• The throttle remains at Idle;
• The transmission commands Ahead or Astern;
• Control Head red LED flashing.

D) Continued Control Head lever movement through the Troll Range:

NOTE: If system is set for multiple screw operation, ensure all Control Head levers are in the Neu-

tral/Idle (vertical) or Ahead detent.

Содержание CruiseCommand 785CE

































































































































































Результаты поиска

Содержание CruiseCommand 785CE

Отзывы:

Похожие инструкции для CruiseCommand 785CE

Бренды по названию

Популярные бренды

ZF CruiseCommand 785CE, Инструкция по установке и устранению неисправностей

Результаты поиска

Содержание CruiseCommand 785CE

Отзывы:

Похожие инструкции для CruiseCommand 785CE

Бренды по названию

Популярные бренды