Zero 88 jester 24, Руководство по эксплуатации

Страница: 42 / 73

JesterML Operating Manual Setup Mode
42 of 73 73-406-00 Issue 2.0
using the up and down cursor buttons. Press ENTER when the DMX address has
been set. The next fixture may now be patched by selecting it using the Multi-
Function-Keys.
The desk will not accept a DMX address which would an overlap with another
patched fixture or preset channel. Overlapping DMX addresses must be first
unpatched before they can be re-used.
To unpatch a fixture, press the CLEAR button. <---> will be shown in the DMX
address field.
To add an additional DMX address (duplicate) for a fixture, first select that fixture,
and then press the INSERT button. Then enter the duplicate DMX address in the
usual way. Up to 10 DMX addresses may be specified for a fixture, the desk will give
a warning if you try to exceed this. Duplicate DMX addresses are shown with a
+n
(where
n
is the number of the duplicate) after the DMX address to indicate the
duplicate number. Duplicate DMX addresses can be selected using the up and down
cursor buttons.
To remove an additional DMX address (duplicate) for a fixture, first select the fixture,
then select the DMX address to be removed, then press the CLEAR button. The
duplicate DMX address will be removed from the list.
Patching Multi-Part Fixtures
Multi-part fixtures are fixtures which have more than one DMX Address, for example
a
Lamp + Scroller fixture. The parts of the fixture are patched separately, in the
same way as that described above for normal fixtures. When a multi-part fixture is
selected with the Multi-Function-Keys, the first
part is selected, and this is indicated
on the Main LCD, e.g. Lamp . Use the left and right cursor buttons to select the other
parts (e.g. Scroll ) of the fixture for patching.
Patching the Preset Channels
The operation to patch preset channels is identical to that described above for
fixtures. Channels can be selected either by using the left and right cursor buttons, or
on the JesterML24 and JesterML48, by using the Channel FLASH buttons.
Setting the default patch
To clear the DMX patch back to default, press and hold the clear button for 1 second.
All fixtures will be unpatched. The preset channels will be patched as follows:
JesterML JesterML24 JesterML48
No DMX Input Not patched 1-24 1:1 1-48 1:1
DMX Input present 1-48 1:1 1-48 1:1 1-48 1:1
Note that the default patch is not dependant on the
Wing Width setting.
Auto patch
To automatically patch all fixtures sequentially according to their channel usage, hold
down the SHIFT and CLEAR buttons together for 1 second. The previous patch will