Zero 88 jester 24, Руководство по эксплуатации

Страница: 48 / 73

JesterML Operating Manual Setup Mode
48 of 73 73-406-00 Issue 2.0
1. Select the <Memory Recovery> menu option using the cursor buttons, then press
ENTER.
2. The mode can be toggled by pressing ENTER, then using the up or down cursor
buttons to toggle between Memory Recovery On and Off. Once you’ve set the
recovery mode as you require, press ENTER, use the cursor buttons to select
<OK> and then press ENTER.
Remote Input
The remote input can be set to behave as any button on the front panel of the desk.
Use the cursor buttons to select <Remote Input> and press ENTER. Now press
ENTER and the button you want the remote input to trigger. The default is
Program/Go. Once you’ve set the input as you require, use the cursor buttons to
select <OK> and press ENTER.
To disable remote input, press SHIFT and ENTER with the button field selected. The
display will read <Disabled>.
Sound Input
Setup allows you to enable or disable the Sound2Lite input on the back of the desk.
Use the cursor buttons to select <Sound Input> and press ENTER. Now press
ENTER and use the up or down cursor buttons to toggle between <Enabled> and
<Disabled>. Once the option you wish is showing, press ENTER, then move to
<OK> and press ENTER again.
MIDI Setup
The MIDI input can be configured in Setup. Select the <MIDI Setup> menu option
and press ENTER. The Main LCD/Monitor display three settings:
Enabled/Disabled
This option specifies whether the MIDI input is enabled. Select this option using
the cursor buttons, press ENTER, and use the up & down cursor buttons to
enable or disable MIDI. Press ENTER when done. Note that due to internal
resource limitations, a USB Keyboard cannot be used when MIDI is enabled.
Channel
This selects the MIDI channel which is received, 1-16. Select <Channel> using
the cursor buttons, press ENTER, and use the up & down cursor buttons to set
the MIDI channel number (or enter this using the Multi-Function-Keys). Press
ENTER when done. To set MIDI to receive on all channels, select <Channel>
using the cursor buttons, hold down SHIFT and press ENTER, and <--> will be
displayed as the MIDI channel number.
Note
This sets the MIDI note which corresponds to the first preset/submaster on the
desk. To change this, select <Note> using the cursor buttons, press ENTER, and
use the up & down cursor buttons to set the MIDI note number (or enter this using
the Multi-Function-Keys). Middle C is note 60. Press ENTER when done. To set
MIDI to map octaves (which have 12 notes since they include both the black and
white notes on a piano keyboard) to presets/submasters, select <Note> using the
cursor buttons, hold down SHIFT and press ENTER, and <---> will be displayed
as the MIDI note number.