JesterML Operating Manual
Setup Mode
46 of 73
73-406-00 Issue 2.0
Locking / Unlocking the desk
The JesterML can be locked with a 4 digit code to prevent unauthorised modification
to recorded data. When locked, memories, submasters and palettes cannot be
programmed, edited or cleared. Additionally no Setup options (such as assigning
fixtures or changing the DMX Patch) can be performed while the desk is locked. It is
still however possible to replay memories, submasters and palettes normally.
To lock/unlock the desk, select <Lock/Unlock>, and press ENTER.
If the desk is unlocked, you must now enter the lock code using the Multi-Function-
Keys and press ENTER. The default lock code for the JesterML is 0000. Once the
correct lock code has been entered, you will be presented with 2 options:
Lock Desk
To lock the desk and prevent any changes to the recorded data, select <Lock
Desk>, press ENTER. The desk is now locked, and you will be returned to the
Setup menu.
Change Code
It is recommended that you change the lock code from the default to something
that you will be able to easily remember. To do this, select <Change Code>,
press ENTER, then type in the new code using the Multi-Function-Keys and press
ENTER again. You will be returned to the Setup menu.
If the desk is locked, then you will be prompted to enter the 4 digit unlock code, using
the Multi-Function-Keys. If this is entered correctly then the desk will be unlocked
and you will be returned to the Setup menu. Changes to the recorded data can now
be made as normal.
If you forget the lock code for your JesterML, please contact Zero 88 Technical
Support for assistance, and have the desk’s serial number to hand. You may be
asked some questions to verify your identity and ensure that you have genuine
reason to unlock a desk without knowing it’s lock code.
Clearing Memories and Submasters
If you wish to clear the memories and submasters, select <Clear Mems/Subs>.
Press ENTER and the desk will ask you to confirm whether you wish to clear these
areas of the desk. Use the cursor buttons to select <OK>, and press ENTER. The
memories and submasters will be cleared, and you will be returned to the Setup
menu.
Clearing Palettes
If you wish to clear the palettes, select <Clear Palettes>. Press ENTER and the desk
will ask you to choose which attributes to clear. Use the COLOUR, BEAMSHAPE
and POSITION keys to toggle the setting for each attribute; <Yes> means that all
palettes of that attribute will be cleared, <No> means that palettes of that attribute will
not
be cleared. Use the cursor buttons to select <OK>, and press ENTER. Palettes
of the chosen attributes will be cleared, and you will be returned to the Setup menu.
Содержание jester 24
Страница 1: ...OPERATING MANUAL including ...
