Zero 88 jester 24 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 73

background image

JesterML Operating Manual

Introduction

4 of 73

73-406-00 Issue 2.0

Introduction

This Manual

This manual describes the operation and programming of the JesterML, JesterML24
and JesterML48 lighting desks.  It begins with a general description of the desks, the
master controls, turning on the desk and the default state.  The main sections cover
the  different  operating  modes  of  the  desk,  namely  PRESET,  PROGRAM  and  RUN.
Each  of  these  sections  contains  a  basic  description  of  the  relevant  front  panel
controls  and  displays,  and  a  step  by  step  guide  to  the  various  functions  available.
The  manual  then  moves  on  to  more  specific  areas  of  the  desk  such  as  Fixture
Control,  DMX  Input,  and  concludes  with  sections  on  the  SETUP  functions  and  the
technical specification of the desk.

This  manual  refers  to  all  three  desks  in  the  JesterML  range  as  simply  ‘JesterML’.
Almost  all  of  the  operational  details  are  common  to  the  three  desks  –  the  bigger
desks simply have additional channel / submaster faders and buttons. Where specific
differences exist between the desks, these will be noted in the text.  It is worth noting
here that with an external desk (e.g. a Jester24/48) connected to the DMX-Input as a
fader wing, a JesterML can control the same number of channels and submasters as
a JesterML48.

This manual is written for software version 2.0 and later.  If your desk is running older
software it is strongly recommended that you update to the latest version to take full
advantage  of  the  new  features.    The  software  version  can  be  found  in  the  SETUP
menu.  See the section on

Software Updates

for further details.

«
...
2
3
4
5
6
...
»

Содержание jester 24










































































Отзывы:

Нет отзывов

Похожие инструкции для jester 24

Бренд: ADVANCED HOME CARE Страницы: 16

Бренд: Eaton Страницы: 16

Бренд: Eaton Страницы: 6

Бренд: Ecco Страницы: 17

Бренд: Gainsborough Страницы: 2

Бренд: Gainsborough Страницы: 2

Бренд: Gait up Страницы: 12

Бренд: Gainsborough Страницы: 2

Бренд: Gait up Страницы: 6

Бренд: Gaiam Страницы: 2

Бренд: Nemalux Страницы: 6

Бренд: OBDLink Страницы: 2

Бренд: Madrigal Страницы: 5

Бренд: MacDon Страницы: 504

Бренд: Mach Страницы: 12

Бренд: Yamaha Страницы: 31

Бренд: Ultrasonic Страницы: 33

Бренд: zapco Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды