ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
36
36
3.4. INPUTS
ZAS includes two input channels that can be configured as switches/sensors, temperature
probes or movement detectors.
Once the input is enabled, the access to the corresponding configuration window is shown in the
main menu according to the configured input type.
3.4.1. SWITCH/SENSOR
When configuring an input as a switch/sensor, it is necessary to select the actions to perform
on the arrival of one falling edge and on the arrival of one rising edge.
Figure 3.14. Input: Switch/Sensor
The available options are:
Rising edge:
for
selecting the value to be sent when this edge happens:
Nothing
(no action is performed).
0
: object "[Ix] Edge" is sent to the KNX bus with value "0".
1
: object "[Ix] Edge" is sent to the KNX bus with value "1".
Switching
: "0" or "1" are alternatively sent to the KNX bus.
Falling edge:
for
selecting the value to be sent when this edge happens. As in the above
case, Nothing, 0, 1 or Switching are permitted.
