ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
19
19
Figure 3.6. Remote control
The following parameters may be configured:
Action buttons only for Page 1?:
this parameter sets if the action buttons of the
remote control (see Figure 2.3) will only control the configuration established for page 1
(option "Yes") or if they will simulate the behaviour of the buttons of all the configured
pages (1-4), with option "No".
The exclusive control of the buttons of page 1 implies that every press over the
remote’s
Menu or Arrow buttons will not be taken into account (navigation through the other pages
from the remote control is not possible, but it is by pressing the same buttons in the touch
panel). Presses over the other action buttons will provoke an automatic switch to page 1
and the corresponding action will be executed, according to the pressed button.
If the action buttons of the remote do not only control page 1, presses over them will carry
out different actions, according to the currently shown page and the configuration
parameterized for every button.
Special function 1 (F1):
configurable for sending the values "1", "0" or switching
between them when button F1 from the remote control is pressed. A new 1-bit
communication object will appear: "[IR] F1".
Special Function (F2):
same behaviour as F1, but in this case, when pressing
button F2 in the remote control, the 1-bit object "[IR] F2" will be enabled.
