ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
40
40
To obtain theoretical information about how Zennio thermostats work, as well as information about
the ETS configuration, please consult the specific documentation "
Thermostat Zennio
" available at:
3.6. PRESENCE SIMULATION
This function is designed to simulate presences in a building, once the devices of the KNX
installation have been correctly parameterized.
It allows randomly switching on/off some elements in the domotic installation during a period of time
set by parameter.
Figure 3.19. Presence simulation
After enabling the presence simulation in ETS, two new 1-bit communication objects will be shown:
"[Sim] Presence Simulation" and "[Sim] Simulation Channel". The first one allows activating or
deactivating the presence simulation, by sending the value "1" or "0", respectively (note that the fact
of enabling this functionality does not necessarily imply an immediate begin of the presence
simulation; it will be subject to the parameterized start and finish times). The second one is in
charge of randomly sending (i.e., at random instants between the parameterized start and the end
times, respecting in any case the parameterized minimum and maximum times for each state)
binary values ("1" or "0") to switch the devices in the KNX installation on and off, such as light
