ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
41
41
sources or shutter controllers. This object must be linked to the same group address as the
corresponding control objects that are in charge of switching the devices on and off in the
installation.
The parameters to be configured are:
Starting/Finish time:
to establish the start time (hours and minutes) at which the
presence simulation begins or finishes (provided that the functionality has been enabled by a
“1” through the object "[Sim] Presence simulation").
Note:
The start and the finish times must be different values; if not, the presence simulation
will not work properly.
Minimum/Maximum ON/OFF time
to adjust, by parameter, the minimum and maximum
ON/OFF time for the devices in the installation.
Note:
The value established for Maximum Time (both ON and OFF) must be greater than the
value established for Minimum Time. If not, anomalous situations can be expected.
