Zeiss CIRRUS HD-OCT 500, Руководство пользователя

Страница: 17 / 352

CIRRUS HD-OCT User Manual 2660021169012 Rev. A 2017-12
Cautions
1- 3
WARNING: This instrument may cause ignition of flammable gases or vapors. Do NOT use
in the presence of flammable anesthetics such as nitrous oxide, or in the presence of pure
oxygen.
WARNING: The instrument itself is transportable and may be moved from one location to
another. However, if the instrument is placed on a power table provided by CZMI, do not
move the table to another location while the instrument and any other peripherals are
placed on it. Doing so may cause the system components to tip over and cause harm to the
patient, the operator, or others in the vicinity.
WARNING: Do not scan patients who have been injected with photo–dynamic therapy
(PDT) treatment drugs, such as Visudyne
®
, in the previous 48 hours. Failure to observe this
warning could result in unintended exposure and uncontrolled treatment of neovascular
vessels.
WARNING: This device contains visual stimuli, including flickering light and flashing
patterns, between 5 and 65 Hz. Medical professionals need to determine whether this
device should be used for patients who may be photosensitive, including those with
epilepsy.
Cautions
CAUTION: Failure to provide proper ventilation could potentially lead to heat build–up,
which could cause component failure and/or fire.
CAUTION: Users are not authorized to dismantle (except to remove the rear cover) or
modify the CIRRUS HD-OCT hardware. To transport the instrument outside the office, you
must consult with a Zeiss service technician.
CAUTION: Avoid tipping. Do not use the instrument on an uneven or sloped surface.
Also, do not roll the table in deep pile carpet or over objects on the floor such as power
cords. Failure to observe these precautions could result in tipping of the instrument and/or
table and resulting injury to operator or patient and damage to the instrument.
CAUTION: When you complete scan acquisition and before you click the
Finish
or
ID
Patient
buttons in the
Acquire
screen, always prompt the patient to sit back and move the
head away from the chinrest. Clicking either of these buttons in the
Acquire
screen causes
the chinrest to reposition itself beyond the point where the patient’s eye would contact the
lens if the head remained in the chinrest. Failure to observe this warning could result in
injury to the patient.
CAUTION: The operator should check that the patient is not holding on to the instrument
before or during tests. Although movement of the motorized chinrest is slow, giving plenty
of warning for patients to remove their fingers, there is potential for fingers to be squeezed
and possibly injured.