![background image](http://html1.mh-extra.com/html/zeiss/axioskop-40/axioskop-40_operating-manual_3382221083.webp)
Axioskop 40
OPERATION
Axioskop 40 FL
Axioskop 40 operation and function controls
Carl Zeiss
B 40-810 e 12/01
3-9
Specimen marker
The specimen marker is screwed into the
nosepiece instead of an objective and can be used
to mark details of special interest in color on the
carrier plate. This enables you to find the marked
position more easily.
Three dot or arc markings with a diameter of
5 mm each can be placed on the cover slip.
The red ink adheres well to glass and quickly air
dries. However, the ink dissolves when it comes
into contact with immersion oil and can be wiped
off.
Do not allow the writing surface to become wet or
dirty.
•
Move specimen detail to the center of the
viewing field.
•
Remove cover (3-6/
4
) by pulling it down and
swivel specimen marker (3-6/
1
) into the beam
path.
•
Press specimen marker ring (3-6/
2
) down. Exert slight pressure until contact with the cover slip
generates 3 dots. Additional pressure on the ring triggers rotation of the ink pins (3-6/
3
), which
generates 3 arcs.
−
The spring position of the ink pins prevents damage to the cover slip and writing surface.
−
To find the marked specimen detail later, it is best to use an overview objective. This aligns the
marking symmetrically to the viewing field edge. Then swivel in an objective with greater
magnification (up to approx. 40x). The specimen detail will now be in the viewing field range.
☞
It is recommended to swing the specimen marker out of the beam path after use and to attach
the cover if it is not to be used for longer periods.
Drive knob for condenser height adjustment (3-1/16)
−
Condenser height adjustment to set KÖHLER illumination.
Clamping lever for focusing drive height stop (3-1/17)
−
Adjustable height stop for stage focusing..
•
Turn the clamping lever up against the pin stop. Move stage to the highest position with the focusing
drive to prevent collisions with the stage or carrier plate. Clamp in position by pressing on the
clamping lever.
Fig. 3-6
Specimen marker
Содержание Axioskop 40
