INTRODUCTION
Axioskop 40
Carl Zeiss
Notes on instrument safety
Axioskop 40 FL
0-10
B 40-810 e 12/01
The Axioskop 40 and Axioskop 40 FL microscopes are not equipped with any special devices for
protection from substances that are corrosive, toxic, radioactive or other substances that could
be hazardous to health. All the legal regulations, particularly the pertinent accident prevention
regulations of the respective country, must be observed when handling such substances.
Gas-discharge lamps, e.g. HBO 50 or HBO 103, emit ultraviolet radiation, which can cause
burns to the eyes and skin. Therefore, never look directly into the light of these lamps and
avoid direct, unprotected incidence of their light on your skin. When using the microscope,
always use the protective devices belonging to the instrument (e.g. special attenuation filters or
the fluorescence protection shield). When they are hot, gas-discharge lamps are under high
internal pressure and may therefore only be changed when they have cooled down, and
protective gloves and goggles must be used (for detailed information please see Operating
Manual B 40-065 e).
When fluorescence filters are used, the heat protection filter for heat emitted by the
microscope illuminator must not be removed, since fluorescence filters are sensitive to heat,
and their performance could be impaired.
Avoid touching the hot lamp housing. Always pull the power plug before changing the lamps
and allow the instrument to cool down for some 15 minutes.
Dust and dirt may impair the instrument’s performance. Therefore, the instrument must be
protected from these influences as far as possible and covered with the dust cover when not in
use. Always check whether the instrument is switched off before you cover it.
Placing objects against or covering ventilation slats may lead to heat build-up that will damage
the instrument and, in extreme cases, cause a fire. Always keep the ventilation slats clear and
ensure that no objects enter the instrument through the ventilation slats.
The instruments may only be operated by trained personnel who must be aware of the possible
dangers involved with microscopy and the particular application concerned. The Axioskop 40 /
Axioskop 40 FL is a high-precision instrument that can be impaired in its performance or
destroyed when handled improperly.
Содержание Axioskop 40
