User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
60/193
Figure 34 – Connecting the photovoltaic connectors
Before removing the positive and negative PV connectors, make sure that the DC CIRCUIT
BREAKER is OPEN.
Caution
Removal procedure
Use a MC4 wrench to disconnect the photovoltaic connectors, as shown in figure below.
Figure 35 – Disconnecting the photovoltaic connectors
Connect the 1PH HYD3000-HYD6000-ZP1 inverter to the photovoltaic strings using the DC input power cables.
Select the input mode: the 1PH HYD3000-HYD6000-ZP1 inverter has two MPPTs, which can function either
independently or in parallel. The user can choose the appropriate MPPT operating mode according to the design
of the system
.
