User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
140/193
(a)
(b)
Figure 61
– Inserting and securing the external Wi-Fi adapter
4)
Switch on the inverter by following the procedure described in the manual.
15.1.2.
Configuration
Configuration of the Wi-Fi adapter requires the presence of a Wi-Fi network near the inverter in order to
achieve stable transmission of data from the inverter adapter to the Wi-Fi modem.
Tools required for configuration:
•
Smartphone, PC or tablet
Go to front of the inverter and search for the Wi-Fi network using a smartphone, PC or tablet, making sure that
the signal from the home Wi-Fi network reaches the place where the inverter is installed.
If the Wi-Fi signal is present at the location where the inverter is installed, the configuration procedure can
begin.
If the Wi-Fi signal does not reach the inverter, a system must be installed to amplify the signal and bring it to
the installation location.
1)
Activate the search for the Wi-Fi networks on your telephone or PC so that all the networks visible by
your device are displayed.