User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
47/193
4.
Configure channels as described below:
Inverter channels
Configurations of the inverter channels
Channel 1 entry
Admission batt 1
Admission batt 2
Unused
Channel 2 input
Admission batt 1
Admission batt 2
Unused
Channel 3 input
Input FV 1
Input FV 2
Unused
Channel 4 input
Input FV 1
Input FV 2
Unused
•
• For systems up to 3 batteries
o
Channel 1 input - Batt 1 input;
o
Channel 2 input – Batt 2 input;
5.
Once you have correctly configured the channels access the advanced settings by pressing the last button on
the right of the inverter (enter password 0715):
1.
Basic settings
2.
Advanced settings
3.
Production statistics
4.
About the system
5.
List of events
6.
SW Update
6.
Access
by pressing the last button on the right of the inverter under battery parameters:
1.
Battery parameters
2.
Active battery
3.
Feed-in limitation
4.
Scan curve IV
5.
Logic Interface
6.
Reset to factory
7.
Parallel settings
8.
Reset Bluetooth
9.
CT calibration
